{"title":"Uncoupling Membranes","description":"Uncoupling and crack-isolation membranes for tile installations. Compare Schluter DITRA, DITRA-XL, and DITRA-HEAT against Mapei Mapeguard UM.","products":[{"product_id":"schluter-ditra-uncoupling-membrane-33-x-165-54-sf","title":"Schluter® DITRA UNCOUPLING MEMBRANE 3'3\" X 16'5\" = 54 SF","description":"\u003cp\u003eDITRA is the industry-standard uncoupling membrane for tile and stone floors. It prevents cracking by isolating your tile from subfloor movement — wood expands, concrete shifts, and DITRA absorbs it all so your tile doesn't have to. This 54 sq ft roll is sized right for a single bathroom or small kitchen.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8\" (3.5mm) thick polyethylene mat with dovetail-cut cavities that lock into thin-set mortar from both sides\u003c\/li\u003e\n\u003cli\u003eFour functions in one layer: uncoupling, waterproofing, vapour management, and load distribution — replaces the need for separate crack isolation and moisture barriers\u003c\/li\u003e\n\u003cli\u003eCovers 54 sq ft at 33\" wide — install over plywood (min 5\/8\" exterior grade) or concrete with unmodified thin-set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: Use unmodified thin-set to bond DITRA — modified mortars don't cure properly when sandwiched between two non-porous surfaces. This is the most common installation mistake we see.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48063007785127,"sku":"DITRA5M","price":135.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/ditra-roll.jpg?v=1773084745"},{"product_id":"schluter-ditra-uncoupling-membrane-33-x-985-323-sf","title":"Schluter® DITRA Uncoupling Membrane — 3'3\" × 98'5\" (323 SF) Large Roll","description":"\u003cp\u003eThe 323 sq ft DITRA roll is contractor-sized for large tile jobs — open floor plans, full first floors, or commercial spaces. One roll covers a substantial area with minimal seaming, and the cost per square foot is better than smaller rolls.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSame 1\/8\" (3.5mm) polyethylene uncoupling membrane as all DITRA products — dovetail cavities lock into thin-set from both sides, preventing tile cracks caused by subfloor movement\u003c\/li\u003e\n\u003cli\u003e33\" wide x 98.5' long (323 sq ft) — fewer seams means faster installation and fewer potential weak points in the membrane layer\u003c\/li\u003e\n\u003cli\u003eFour functions: uncoupling, waterproofing, vapour management, and load distribution — installed with unmodified thin-set over plywood or concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: For jobs over 300 sq ft, buy one contractor roll rather than multiple small rolls. Less waste, less seaming, and a better price per square foot.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064074350759,"sku":"DITRA30M","price":704.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/ditra-roll_1fd477dc-062b-4605-a512-c82e5c122e90.jpg?v=1773093394"},{"product_id":"schluter-ditra-uncoupling-membrane-33-x-459-150-sf","title":"Schluter® DITRA UNCOUPLING MEMBRANE 3'3\" X 45'9\" = 150 SF","description":"\u003cp\u003eThe 150 sq ft DITRA roll is the mid-size option — right for larger bathrooms, open kitchens, and multi-room renovations where the 54 sq ft roll runs short but a full contractor roll is overkill. Better cost per square foot than the small roll, less waste than the large one.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8\" (3.5mm) polyethylene uncoupling membrane — same dovetail cavity system that locks into thin-set mortar, preventing tile cracks from subfloor movement\u003c\/li\u003e\n\u003cli\u003e33\" wide x 45.9' long (150 sq ft) — four-in-one layer handles uncoupling, waterproofing, vapour management, and load distribution\u003c\/li\u003e\n\u003cli\u003eInstall over plywood (min 5\/8\" exterior grade) or concrete with unmodified thin-set mortar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: Calculate your actual tile area before ordering. A 150 sq ft roll covers a typical 10x12 bathroom floor with enough left over for the hallway outside the door.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064074449063,"sku":"DITRA150","price":354.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/ditra-roll_370d7baf-5e69-4470-9421-39a5fcc078b9.jpg?v=1773093402"},{"product_id":"schluter-ditra-xl-uncoupling-membrane-33-x-533-175-sf","title":"Schluter® DITRA-XL Uncoupling Membrane — 3'3\" × 53'3\" (175 SF)","description":"\u003cp\u003eDITRA-XL is the heavy-duty version of DITRA — 5\/16\" thick instead of 1\/8\", with deeper mortar columns under the tile for better performance over substrates with higher anticipated movement, under heavy natural stone, or in commercial applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSame polyethylene grid and dovetail cavity system as standard DITRA — four functions (uncoupling, waterproofing, vapour management, load distribution) in a thicker profile\u003c\/li\u003e\n\u003cli\u003e175 sq ft roll at 33\" wide x 53.3' long — contractor-friendly size for large format stone and high-movement substrates\u003c\/li\u003e\n\u003cli\u003eDeeper cavities mean thicker mortar columns, which better accommodate lateral substrate movement and support heavier tile assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: Use DITRA-XL when installing large-format natural stone (12x24 and up) or over substrates you're not fully confident in. For standard ceramic and porcelain on solid subfloors, regular DITRA is sufficient.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064077627559,"sku":"DITRA-XL\/175","price":439.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/DITRAXL-roll.jpg?v=1773093412"},{"product_id":"schluter-ditra-heat-roll-32-58-x-4110-34-1345-sf","title":"Schluter® DITRA-HEAT ROLL 3'2-5\/8\" X 41'10-3\/4\" = 134.5 SF","description":"\u003cp\u003eIf you want heated tile without building up a thick floor or messing around with clips, this is the membrane the whole Schluter system revolves around. It warms the floor and protects the tile assembly at the same time.\u003c\/p\u003e\n\u003ch3\u003eProduct overview\u003c\/h3\u003e\n\u003cp\u003eSchluter DITRA-HEAT is a studded uncoupling membrane that accepts DITRA-HEAT-E-HK heating cables and adds four critical functions under tile: uncoupling, waterproofing, vapor management, and load distribution. This roll covers up to 134.5 square feet and installs at a slim nominal thickness of about 1\/4\".\u003c\/p\u003e\n\u003ch3\u003ePro tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse rolls for the main field and fill in awkward cuts with sheets if your room has lots of jogs or fixtures.\u003c\/li\u003e\n\u003cli\u003eDon't buy based on room size alone. Measure the actual heated area after subtracting cabinets, tubs, and toilets.\u003c\/li\u003e\n\u003cli\u003eIf you're working over plywood or OSB, ALL-SET or FAST-SET is the safer bond coat. Over concrete or gypsum, SET works well.\u003c\/li\u003e\n\u003cli\u003eIf you need better sound control or a thermal break over a cold substrate, step up to DITRA-HEAT-DUO instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall fleece-side down in thin-set mortar and fully embed it with a float or roller.\u003c\/li\u003e\n\u003cli\u003eSheets are installed edge to edge, not overlapped.\u003c\/li\u003e\n\u003cli\u003eHeating cables snap into the stud pattern — no fasteners through the floor.\u003c\/li\u003e\n\u003cli\u003eTile can be installed immediately after cable placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it pairs with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDITRA-HEAT-E-HK 120V or 240V heating cables\u003c\/li\u003e\n\u003cli\u003eSchluter thermostats from the simple E-R up to the RS1 smart thermostat\u003c\/li\u003e\n\u003cli\u003eSchluter SET, ALL-SET, or FAST-SET mortars\u003c\/li\u003e\n\u003cli\u003eKERDI-BAND if you're waterproofing seams and transitions in wet-area applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho should buy it\u003c\/h3\u003e\n\u003cp\u003eThis is the right call for homeowners and installers who want warm tile floors without giving up the crack-isolation benefits Schluter is known for. It's especially good for bathrooms, entries, laundry rooms, and kitchens where comfort and tile protection both matter.\u003c\/p\u003e\n\u003ch3\u003eComparison to alternatives\u003c\/h3\u003e\n\u003cp\u003eStandard heating mats warm the floor, but they don't give you Schluter's uncoupling layer underneath. Standard DITRA protects tile, but it doesn't accept heating cables. DITRA-HEAT is the one product that does both jobs in a single layer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e It's a Canadian-friendly system, easier to source than pieced-together heating setups, and earns 3% rewards on YourFloors.ca.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064077693095,"sku":"DH512M","price":412.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/DitraHeat-Roll.jpg?v=1773093421"},{"product_id":"schluter-ditra-heat-sheet-32-58-x-27-38-84-sf","title":"Schluter® DITRA-HEAT Sheet — 3'2-5\/8\" × 2'7-3\/8\" (8.4 SF) Fill Piece","description":"\u003cp\u003eNot every heated floor is a perfect rectangle. The DITRA-HEAT sheet is the fill piece that lets you complete your installation cleanly — covering the areas between the main roll runs, filling in corners, or handling an entire small bathroom on its own.\u003c\/p\u003e\n\n\u003cp\u003eThis is full DITRA-HEAT functionality in a single 8.4 SF sheet: uncoupling to protect your tile from subfloor movement, waterproofing, vapor management, and heating cable channels that accept DITRA-HEAT-E-HK cables at standard 3-stud spacing. Same performance as the roll, just a different size.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 3'2-5\/8\" × 2'7-3\/8\" (8.4 SF)\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/4\" (5.5 mm)\u003c\/li\u003e\n\u003cli\u003eCable channels: Accepts DITRA-HEAT-E-HK at 3-stud spacing (~12.7 W\/sq ft output)\u003c\/li\u003e\n\u003cli\u003eBacking: Polypropylene anchoring fleece\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to Use Sheets vs. Roll\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse sheets for:\u003c\/strong\u003e Small bathrooms (under ~40 SF), filling in the cut-off area after a roll run, powder rooms, heated entry mats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the roll for:\u003c\/strong\u003e Any installation over ~40 SF where buying a roll is more cost-effective per square foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix sheets and rolls freely\u003c\/strong\u003e — abut them edge-to-edge with aligned stud channels and the heating cable routes through both seamlessly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBond to substrate with Schluter SET (concrete) or ALL-SET (plywood\/OSB)\u003c\/li\u003e\n\u003cli\u003eButt edges of sheet tightly to adjacent sections — no overlap, just alignment\u003c\/li\u003e\n\u003cli\u003eThe heating cable snaps into stud channels and passes from sheet to sheet without interruption\u003c\/li\u003e\n\u003cli\u003eTile over with unmodified thin-set SET or modified ALL-SET\/FAST-SET\u003c\/li\u003e\n\u003cli\u003eIn wet areas (heated shower floor), seal membrane seams with KERDI-BAND\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePro Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreat option for a small en-suite or powder room.\u003c\/strong\u003e A typical 5' × 8' bathroom needs about 40 SF — two to three sheets gives you complete coverage without the cost of a full roll.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDon't forget the floor sensor.\u003c\/strong\u003e Each DITRA-HEAT thermostat requires a floor temperature sensor. The sensor sits in a channel between the studs — route it during cable installation before tiling covers it up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlan your cable before you set the membrane.\u003c\/strong\u003e Use Schluter's online DITRA-HEAT calculator to figure out the right cable size for your area. Then lay out the cable route on paper before cutting any sheets — there's no adjusting once the mortar is down.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho Should Buy This\u003c\/h3\u003e\n\u003cp\u003eHomeowners heating a small bathroom or powder room, contractors needing fill pieces to complete a roll installation, and anyone doing a heated shower floor where DITRA-HEAT sheets cover the shower pan area cleanly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eComplete your system:\u003c\/strong\u003e DITRA-HEAT-E-HK heating cable (size for your sq footage), DITRA-HEAT thermostat (E-R, E-RT, E-WiFi, or E-RS1), Schluter SET or ALL-SET mortar.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064077725863,"sku":"DH5MA","price":26.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/DitraHeat-Sheets_8adb8e0a-2bec-4fb1-8d5e-8b86d4deaf3c.jpg?v=1773093439"},{"product_id":"schluter-ditra-heat-duo-roll-32-58-x-336-12-108-sf","title":"Schluter® DITRA-HEAT-DUO ROLL 3'2-5\/8\" X 33'6-1\/2\"= 108 SF","description":"\u003cp\u003eDITRA-HEAT-DUO adds a thermal break and sound control layer to the standard DITRA-HEAT membrane. Reach for this when the floor is above another living space, over a cold garage, or in a condo where impact noise transmission matters.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/16\" (8mm) thick — performs the same four functions as standard DITRA-HEAT (uncoupling, waterproofing, vapour management, load distribution) plus integrated sound and thermal insulation\u003c\/li\u003e\n\u003cli\u003e108 sq ft roll at 32-5\/8\" wide — heating cables snap directly into the stud pattern, same as standard DITRA-HEAT\u003c\/li\u003e\n\u003cli\u003eThermal break reduces downward heat loss into the subfloor, so more energy goes into warming your tile instead of heating the ceiling below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: On a concrete slab over an unheated space (garage, crawlspace), the DUO's thermal break makes a real difference in heating efficiency. On a second floor over heated space, standard DITRA-HEAT is usually sufficient.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064087523495,"sku":"DHD810M","price":482.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/DitraHeat_DUO_roll.jpg?v=1773093497"},{"product_id":"schluter-ditra-heat-duo-sheet-32-58-x-27-38-84-sf","title":"Schluter® DITRA-HEAT-DUO Sheet — 3'2-5\/8\" × 2'7-3\/8\" (8.4 SF) Fill Piece","description":"\u003cp\u003eA single 8.4 sq ft sheet of DITRA-HEAT-DUO membrane — same heated floor, sound control, and thermal break performance as the full roll, in a pre-cut piece for finishing off small areas or topping up a roll that ran short.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32-5\/8\" x 27-3\/8\" sheet — heating cables snap directly into the stud channels, same as the full roll\u003c\/li\u003e\n\u003cli\u003eIncludes integrated thermal break and sound control layers — reduces downward heat loss and impact noise transmission between floors\u003c\/li\u003e\n\u003cli\u003eBond to subfloor with unmodified thin-set — same installation method as standard DITRA-HEAT-DUO rolls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: Order a couple of sheets alongside your main roll to cover the odd corners and transitions without cutting into a second roll. They're also the right call for a small powder room or entryway heated floor.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064092438695,"sku":"DHD8MA","price":39.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/DitraHeatDUO-one_sheet.jpg?v=1773093509"},{"product_id":"schluter-ditra-heat-duo-ps-roll-33-x-33-108-sf","title":"Schluter® DITRA-HEAT-DUO-PS ROLL 3'3\" X 33' = 108 SF","description":"\u003cp\u003eDITRA-HEAT-DUO-PS combines all the benefits of the DUO membrane — uncoupling, sound control, thermal break, and heated cable channels — with a peel-and-stick backing that bonds directly to concrete. No thin-set, no trowel, no curing wait.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e108 sq ft roll — peel, press onto clean concrete, and snap DITRA-HEAT cables directly into the stud channels\u003c\/li\u003e\n\u003cli\u003eIntegrated sound control layer reduces impact noise between floors — important in condos, above-garage installations, and multi-storey homes\u003c\/li\u003e\n\u003cli\u003eThermal break layer keeps heat directed upward into the tile instead of dissipating into the slab below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: The DUO-PS is the best membrane choice for heated floors over unheated concrete spaces (basements, garages). You get sound dampening, thermal efficiency, and fast installation in one product.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064098042023,"sku":"DHDPS810M","price":602.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/schluter-ditra-heat-duo-ps.jpg?v=1773097972"},{"product_id":"schluter-ditra-heat-ps-sheet-33-x-27-84-sf","title":"Schluter® DITRA-HEAT-PS SHEET 3'3\" X 2'7\" = 8.4 SF","description":"\u003cp\u003eEverything DITRA-HEAT does — uncoupling, waterproofing, vapor management, and heated floor cable channels — in a single 8.4 SF peel-and-stick sheet. No thin-set, no trowel, no waiting. Clean the concrete substrate, peel the release film, press it down, and you're ready to snap cables in.\u003c\/p\u003e\n\n\u003cp\u003eThe sheet format exists because most heated floor projects don't divide evenly into roll widths. Every installation has corners, nooks, and odd dimensions. Buying the right-sized sheet for those areas is cleaner and less wasteful than unrolling a 134.5 SF roll to get 8 square feet of coverage.\u003c\/p\u003e\n\n\u003ch4\u003eDITRA-HEAT-PS vs. standard DITRA-HEAT — what's different?\u003c\/h4\u003e\n\u003cp\u003eFunctionally identical — same stud channels that accept DITRA-HEAT-E-HK cables, same uncoupling performance, same waterproofing. The PS (peel-and-stick) version bonds via pressure-sensitive adhesive instead of mortar. The trade-off: faster installation on concrete, but \u003cstrong\u003enot suitable for wood subfloors\u003c\/strong\u003e. For plywood or OSB, you need standard DITRA-HEAT with Schluter ALL-SET mortar.\u003c\/p\u003e\n\n\u003ch4\u003eWhen to use this sheet vs. the roll\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the sheet\u003c\/strong\u003e for small areas (powder rooms, entries, laundry alcoves), fill pieces at room edges, or any heated floor project under ~20 SF.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the roll\u003c\/strong\u003e for full bathroom, kitchen, or open-plan installations. The roll works out to a lower cost per square foot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eCable installation\u003c\/h4\u003e\n\u003cp\u003eSnap DITRA-HEAT-E-HK cables into the channels at standard 3-stud spacing. No clips. No self-leveling compound. Tile with Schluter SET (unmodified) mortar immediately after cables are in and tested — no cure wait required for the membrane itself.\u003c\/p\u003e\n\n\u003ch4\u003ePro Tip\u003c\/h4\u003e\n\u003cp\u003eThis sheet is ideal for the fill space between the last full row of membrane and the wall. Rather than awkwardly folding a roll edge into that gap, cut a sheet to size. DITRA-HEAT sheets butt edge-to-edge with rolls without any special transition treatment — just keep the stud pattern aligned so cables run continuously across both pieces.\u003c\/p\u003e\n\n\u003ch4\u003eWho should buy this\u003c\/h4\u003e\n\u003cp\u003eAnyone doing a heated floor installation who needs a fill piece, a small standalone area, or wants to avoid wasting roll footage on a tight square footage project. Also ideal for testing your technique on a small area before committing a full roll to a large floor.\u003c\/p\u003e\n\n\u003ch4\u003ePairs with\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDITRA-HEAT-PS ROLL (for the main field — use sheets as fill)\u003c\/li\u003e\n\u003cli\u003eDITRA-HEAT-E-HK heating cables (120V or 240V)\u003c\/li\u003e\n\u003cli\u003eAny Schluter thermostat (E-R, E-RT, E-WiFi, E-RS1)\u003c\/li\u003e\n\u003cli\u003eSchluter SET unmodified mortar for tiling over the membrane\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEarn 3% back with \u003cstrong\u003eYourFloors Rewards\u003c\/strong\u003e. Ships from Canadian warehouses.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064100892839,"sku":"DHPS5MA","price":33.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/ss_prod_ditraheatps_sheet_r.jpg?v=1773093550"},{"product_id":"schluter-ditra-heat-duo-ps-sheet-33-x-27-84-sf","title":"Schluter® DITRA-HEAT-DUO-PS SHEET 3'3\" X 2'7\" = 8.4 SF","description":"\u003cp\u003eA single 8.4 sq ft peel-and-stick DITRA-HEAT-DUO sheet — full uncoupling, sound control, thermal break, and heated cable support with no thin-set required. Bond directly to clean concrete, snap in cables, and tile.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e33\" x 27\" sheet with pressure-sensitive adhesive backing — peel, press onto concrete, and roll for full contact\u003c\/li\u003e\n\u003cli\u003eIntegrated sound control and thermal break layers — reduces impact noise between floors and directs heat upward into the tile rather than down into the slab\u003c\/li\u003e\n\u003cli\u003eSame cable compatibility as all DITRA-HEAT membranes — works with DITRA-HEAT-E-HK cables at 120V or 240V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: Keep a couple of DUO-PS sheets on hand to fill in small areas around a main roll installation. They're ideal for finishing corners, closet entries, and awkward transitions over concrete.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064100925607,"sku":"DHDPS8MA","price":49.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/ss_prod_ditraheatduops_sheet_r.jpg?v=1773093561"},{"product_id":"schluter-ditra-heat-ps-roll-33-x-411-1345-sf","title":"Schluter® DITRA-HEAT-PS ROLL 3'3\" X 41'1\" = 134.5 SF","description":"\u003cp\u003eDITRA-HEAT-PS is the peel-and-stick version of the standard DITRA-HEAT membrane — same uncoupling, waterproofing, and cable channels, but it bonds to clean concrete with pressure-sensitive adhesive instead of thin-set. No mixing, no trowelling, no waiting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e134.5 sq ft roll — peel the release film, press onto clean concrete, roll for full contact, then snap cables directly into the stud channels\u003c\/li\u003e\n\u003cli\u003eIdeal for large heated floor areas over concrete: basements, ground-floor slabs, and condo conversions where you want heated tile without the thin-set bonding step\u003c\/li\u003e\n\u003cli\u003eSame cable compatibility as standard DITRA-HEAT — works with all DITRA-HEAT-E-HK cables and thermostats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePro tip: The PS adhesive only works on concrete substrates — it won't bond properly to plywood. For wood subfloors, use standard DITRA-HEAT with thin-set mortar.\u003c\/p\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064101023911,"sku":"DHPS512M","price":515.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/ss_prod_ditraheatps_r.jpg?v=1773093572"},{"product_id":"schluter-ditra-ps-sheet-32-34-x-25-775-sf","title":"Schluter® DITRA-PS SHEET 3'2-3\/4\" X 2'5\" = 7.75 SF","description":"\u003cp\u003eThe DITRA-PS sheet is a single 3'2-3\/4\" × 2'5\" piece of Schluter's peel-and-stick uncoupling membrane — same technology as the rolls, just sized for fill work. Use it to patch gaps at the edges of a room, fill in around obstacles, or cover small areas like a laundry room or entryway that don't justify a full roll.\u003c\/p\u003e\n\n\u003cp\u003eAt 7.75 sq ft, it's roughly the size of a bathtub footprint. Most installers grab a few sheets alongside their main roll to avoid cutting and wasting roll material on small sections.\u003c\/p\u003e\n\n\u003ch4\u003eWhen to use sheets vs. rolls\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheets:\u003c\/strong\u003e Fill pieces, small rooms, closets, edges, around toilets and vanities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRolls:\u003c\/strong\u003e Main floor coverage — fewer seams, faster for large areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro move:\u003c\/strong\u003e Order your rolls for the main area, then add 2–4 sheets for corners and fill\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSame technology, same rules\u003c\/h4\u003e\n\u003cp\u003eDITRA-PS sheets have the same pressure-sensitive adhesive, same polyethylene structure, same four functions as the rolls. Installation is identical: peel the liner, press onto a clean substrate, roll flat, tile directly over it with mortar.\u003c\/p\u003e\n\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage: 7.75 sq ft per sheet\u003c\/li\u003e\n\u003cli\u003eDimensions: 3'2-3\/4\" × 2'5\"\u003c\/li\u003e\n\u003cli\u003eThickness: ~1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003eFunctions: Uncoupling + Waterproofing + Vapor Management + Load Distribution\u003c\/li\u003e\n\u003cli\u003eAdhesive: Pressure-sensitive (PSA), solvent-free\u003c\/li\u003e\n\u003cli\u003eMin tile size: 2\" × 2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003ePairs with\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDITRA-PS rolls — for main floor coverage\u003c\/li\u003e\n\u003cli\u003ePRIMER-PS — on difficult substrates (OSB, gypsum concrete)\u003c\/li\u003e\n\u003cli\u003eSchluter SET or ALL-SET mortar — for tile bonding\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064101154983,"sku":"DITRAPSMA","price":24.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/prod_DITRA-PS-MA_001_web.jpg?v=1773093592"},{"product_id":"schluter-ditra-ps-roll-32-34-x-834-269-sf","title":"Schluter® DITRA-PS ROLL 3'2-3\/4\" X 83'4\" = 269 SF","description":"\u003cp\u003eDITRA-PS is the peel-and-stick version of Schluter's DITRA uncoupling membrane — same four core functions (uncoupling, waterproofing, vapor management, load distribution), but the underside comes with a pressure-sensitive adhesive instead of requiring thin-set mortar. Peel, press, roll, tile. The 269 SF roll is the large-format option for bigger rooms, open-concept floors, or multi-room projects where cutting from one continuous roll is faster than aligning multiple smaller pieces.\u003c\/p\u003e\n\n\u003cp\u003eAt 3'2-3\/4\" wide by 83'4\" long, this roll covers a 269 sq ft area — roughly a large living room, two bathrooms, or a good-sized kitchen. One roll, one application, minimal seams.\u003c\/p\u003e\n\n\u003ch4\u003eWhy the large roll?\u003c\/h4\u003e\n\u003cp\u003eFewer seams = faster install and fewer potential weak points. On a 250+ sq ft job, the large roll saves time aligning sheets and eliminates most butt joints. The math is simple: one continuous membrane beats twenty individual sheets every time.\u003c\/p\u003e\n\n\u003ch4\u003eSubstrate compatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete — clean, cured, and flat\u003c\/li\u003e\n\u003cli\u003ePlywood (min 5\/8\" exterior-grade or Advantech)\u003c\/li\u003e\n\u003cli\u003eOSB — use PRIMER-PS first for reliable adhesion\u003c\/li\u003e\n\u003cli\u003eExisting vinyl, ceramic tile, terrazzo — direct application\u003c\/li\u003e\n\u003cli\u003eGypsum concrete — apply PRIMER-PS first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eInstallation notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate must be clean, dry, and flat — no dust, paint, adhesive residue\u003c\/li\u003e\n\u003cli\u003eApply fleece\/adhesive side down, roll firmly with DITRA-ROLLER or screed trowel\u003c\/li\u003e\n\u003cli\u003eButt sheets tightly — never overlap\u003c\/li\u003e\n\u003cli\u003eFor OSB, gypsum concrete, or vinyl substrates, prime with PRIMER-PS first\u003c\/li\u003e\n\u003cli\u003eStore between 41–86°F (5–30°C) — PSA is temperature-sensitive\u003c\/li\u003e\n\u003cli\u003eKeep out of prolonged UV exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage: 269 sq ft per roll\u003c\/li\u003e\n\u003cli\u003eDimensions: 3'2-3\/4\" × 83'4\"\u003c\/li\u003e\n\u003cli\u003eThickness: ~1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003eFunctions: Uncoupling + Waterproofing + Vapor Management + Load Distribution\u003c\/li\u003e\n\u003cli\u003eAdhesive: Pressure-sensitive (PSA), solvent-free\u003c\/li\u003e\n\u003cli\u003eMin tile size: 2\" × 2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003ePairs with\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePRIMER-PS — for substrate preparation on difficult surfaces\u003c\/li\u003e\n\u003cli\u003eSchluter SET, ALL-SET, or FAST-SET mortar — tile bonding\u003c\/li\u003e\n\u003cli\u003eKERDI-BAND — for seam sealing at transitions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064101253287,"sku":"DITRAPS25M","price":730.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/prod_DITRA-PS-25m_001_web.jpg?v=1773093603"},{"product_id":"schluter-ditra-ps-roll-32-34-x-3434-110-sf","title":"Schluter® DITRA-PS ROLL 3'2-3\/4\" X 34'3\/4\" = 110 SF","description":"\u003cp\u003eDITRA-PS is the peel-and-stick version of Schluter's original DITRA uncoupling membrane — same four core functions (uncoupling, waterproofing, vapor management, load distribution), but without the thin-set mortar step on the underside. You peel the release liner, press it onto a clean substrate, roll it flat, and you're ready to tile. On a typical bathroom job, that saves 30–45 minutes and eliminates an entire bag of mortar.\u003c\/p\u003e\n\n\u003cp\u003eThe 110 SF roll (3'2-3\/4\" × 34'3\/4\") covers most standard bathrooms and small-to-medium rooms in a single roll. Cut it with a utility knife right on the floor — the membrane scores and snaps cleanly along the woven polyethylene structure.\u003c\/p\u003e\n\n\u003ch4\u003eWhy peel \u0026amp; stick instead of standard DITRA?\u003c\/h4\u003e\n\u003cp\u003eStandard DITRA bonds to the substrate with thin-set mortar. That works perfectly, but it means mixing mortar, troweling it, and waiting for it to cure before moving on. DITRA-PS eliminates that step with a pressure-sensitive adhesive (PSA) on the back. You're tiling the same day you lay the membrane — which matters a lot on tight-schedule renovations.\u003c\/p\u003e\n\n\u003ch4\u003eSubstrate compatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete — clean, cured, and flat\u003c\/li\u003e\n\u003cli\u003ePlywood (min 5\/8\" exterior-grade or Advantech)\u003c\/li\u003e\n\u003cli\u003eOSB — works, but use PRIMER-PS first for best adhesion\u003c\/li\u003e\n\u003cli\u003eExisting vinyl, ceramic tile, and terrazzo — yes, directly over them\u003c\/li\u003e\n\u003cli\u003eGypsum concrete — use PRIMER-PS first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eInstallation notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate must be clean, dry, and flat — no dust, paint, adhesive residue, or curing compounds\u003c\/li\u003e\n\u003cli\u003eApply fleece\/adhesive side down, then roll firmly with a DITRA-ROLLER or float\u003c\/li\u003e\n\u003cli\u003eButt sheets tightly — do NOT overlap\u003c\/li\u003e\n\u003cli\u003eFor difficult substrates (OSB, gypsum concrete, vinyl), apply PRIMER-PS first and let it dry\u003c\/li\u003e\n\u003cli\u003eStore between 41–86°F (5–30°C) — the PSA is temperature-sensitive\u003c\/li\u003e\n\u003cli\u003eAvoid prolonged UV exposure during storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage: 110 sq ft per roll\u003c\/li\u003e\n\u003cli\u003eDimensions: 3'2-3\/4\" × 34'3\/4\"\u003c\/li\u003e\n\u003cli\u003eThickness: ~1\/8\" (3 mm) — same as standard DITRA\u003c\/li\u003e\n\u003cli\u003eFunctions: Uncoupling + Waterproofing + Vapor Management + Load Distribution\u003c\/li\u003e\n\u003cli\u003eAdhesive: Pressure-sensitive (PSA), solvent-free, water-based\u003c\/li\u003e\n\u003cli\u003eMin tile size: 2\" × 2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003ePairs with\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePRIMER-PS — for difficult substrates\u003c\/li\u003e\n\u003cli\u003eSchluter SET, ALL-SET, or FAST-SET mortar — for bonding tile to the membrane\u003c\/li\u003e\n\u003cli\u003eKERDI-BAND — for sealing seams and transitions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Schluter","offers":[{"title":"Default Title","offer_id":48064101318823,"sku":"DITRAPS110","price":324.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/prod_DITRA-PS-25m_001_web_2479ba6b-8b30-439d-999d-2a901d8d1f9a.jpg?v=1773093611"},{"product_id":"mapei-mapeguard-um-membrane-sold-in-linear-feet","title":"Mapei Mapeguard UM Membrane (Sold in Linear Feet)","description":"\u003cp\u003eSubfloor's got cracks or you're tiling over a transition? Mapeguard UM Membrane (Sold in Linear Feet) decouples the tile from substrate movement so cracks below don't telegraph through the finished floor. \u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":49394892243111,"sku":"94285-30-CUT-LF","price":7.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/bulk_79763.jpg?v=1777967833"},{"product_id":"mapei-mapeguard-um-premium-performance-vapor-pressure-equalizing-underlayment-membrane-39-x-16-4","title":"Mapei Mapeguard UM Premium-Performance Vapor-Pressure-Equalizing Underlayment Membrane 39\" x 16' 4\"","description":"\u003cp\u003eSubfloor's got cracks or you're tiling over a transition? Mapeguard UM Premium-Performance Vapor-Pressure-Equalizing Underlayment Membrane 39\" x 16' 4\" decouples the tile from substrate movement so cracks below don't telegraph through the finished floor. \u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":49399110828199,"sku":"2850905","price":153.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/bulk_12535.jpg?v=1777975121"},{"product_id":"mapei-mapeguard-um-premium-performance-vapor-pressure-equalizing-underlayment-membrane-39-x-98-4","title":"Mapei Mapeguard UM Premium-Performance Vapor-Pressure-Equalizing Underlayment Membrane 39\" x 98' 4\"","description":"\u003cp\u003eSubfloor's got cracks or you're tiling over a transition? Mapeguard UM Premium-Performance Vapor-Pressure-Equalizing Underlayment Membrane 39\" x 98' 4\" decouples the tile from substrate movement so cracks below don't telegraph through the finished floor. \u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":49399156998311,"sku":"2850930","price":595.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3954\/4743\/files\/bulk_12534.jpg?v=1777975153"}],"url":"https:\/\/www.yourfloors.ca\/collections\/uncoupling-membranes.oembed","provider":"yourfloors","version":"1.0","type":"link"}