Subfloor imperfections — small dips, ridges, divots — are the enemy of any smooth-looking installation. Ardex Feather Finish is the pro's tool for eliminating them. It's a cement-based skim coat that can be applied from feather-edge thin to about 1/4" thick, which makes it uniquely useful for skimming over minor irregularities rather than doing a full self-leveling pour.

Fast-setting, so you're not waiting around — typically back to work within a couple of hours.

Where it's used

• Skimming low spots before tile or vinyl installation
• Skim coat over embossed vinyl that's being tiled over
• Patching plywood subfloor seams or screw holes
• Over concrete before luxury vinyl installation

Pro Tip: For thin applications, slightly reduce the water content in your mix — a stiffer mix holds a thin edge better without shrinking. For thicker patches, mix to a peanut butter consistency and work quickly before it starts to set.

Don't use this as a structural fill for large voids — it's a skim coat, not a self-leveling underlayment. For significant depth, use a proper SLU product first, then finish with Feather Finish.

Ships from Canadian warehouses. Earn 3% rewards on every YourFloors.ca order.