Armstrong Satinkeeper® Resilient Low Gloss Floor Finish, 32 oz.
Armstrong
SKU: 1531
Restore gloss and protects the finish of Armstrong low gloss and ultra low gloss no-wax vinyl and linoleum floors that have lost their original shine. Use Armstrong Satinkeeper Low Gloss Floor Finish in a 32 ounce bottle.
Renews the appearance of worn or dulled flors
Protects floor from scuffs, scratches and dirt
Does not require buffing
Ready-to-use formula
Finish stays shiny after repeated washings
For Use On: Vinyl & Ceramic; Linoleum
Not for use on high gloss vinyl floors.
Directions For Initial Use:
Coverage: 1 Coat: 375 - 500 sq ft per quart.; 2 Coats: 187 - 250 sq ft per quart
For Use On: Vinyl & Ceramic; Linoleum
Not for use on high gloss vinyl floors.
Directions For Initial Use:
- Sweep or Vacuum floor thoroughly.
- Wash with Armstrong Once 'n Done Floor Cleaner (not recommended for linoleum floors)
- Allow floor to dry.
- Apply a thin coat of Satinkeeper with a clean damp sponge mop or microfiber applicator mop.
- Coat entire surface.
- Allow floor to dry (approximately 30 minutes).
- Reappy Satinkeeper as needed to maintain shine. Only apply 1 - 2 coats at a time.
- If necessary, remove with Armstrong Floor Stripper & Cleaner (not recommended for linoleum floors)
Coverage: 1 Coat: 375 - 500 sq ft per quart.; 2 Coats: 187 - 250 sq ft per quart
