Schluter® DITRA-PS Peel and Stick Tile Underlayment Membrane, 269 sq ft Roll
Official Schluter name: DITRA-PS ROLL 3'2-3/4" X 83'4" = 269 SF (DITRAPS25M)
Free shipping in Canada
Set up account and earn Learn more
- DITRA-PS significantly reduces installation time, labor costs, and cleanup
- Suitable for use with a wide range of substrates, including concrete, OSB (including Advantech), and plywood. It can also be installed over various floor coverings.
- Available by the roll or by the sheet to accommodate various room sizes
- DITRA-PS features the same benefits as DITRA, such as easy cut grooves and air release vents at the corners
Couldn't load pickup availability
Description
Description
DITRA's crack prevention and waterproofing for tile floors, with a peel-and-stick back instead of thin-set underneath. Peel, press, roll, then tile. This contractor roll covers 269 sq ft.
DITRA-PS is the peel-and-stick version of Schluter's DITRA uncoupling membrane — same four core functions (uncoupling, waterproofing, vapor management, load distribution), but the underside comes with a pressure-sensitive adhesive instead of requiring thin-set mortar. Peel, press, roll, tile. The 269 SF roll is the large-format option for bigger rooms, open-concept floors, or multi-room projects where cutting from one continuous roll is faster than aligning multiple smaller pieces.
At 3'2-3/4" wide by 83'4" long, this roll covers a 269 sq ft area — roughly a large living room, two bathrooms, or a good-sized kitchen. One roll, one application, minimal seams.
Why the large roll?
Fewer seams = faster install and fewer potential weak points. On a 250+ sq ft job, the large roll saves time aligning sheets and eliminates most butt joints. The math is simple: one continuous membrane beats twenty individual sheets every time.
Substrate compatibility
- Concrete — clean, cured, and flat
- Plywood (min 5/8" exterior-grade or Advantech)
- OSB — use PRIMER-PS first for reliable adhesion
- Existing vinyl, ceramic tile, terrazzo — direct application
- Gypsum concrete — apply PRIMER-PS first
Installation notes
- Substrate must be clean, dry, and flat — no dust, paint, adhesive residue
- Apply fleece/adhesive side down, roll firmly with DITRA-ROLLER or screed trowel
- Butt sheets tightly — never overlap
- For OSB, gypsum concrete, or vinyl substrates, prime with PRIMER-PS first
- Store between 41–86°F (5–30°C) — PSA is temperature-sensitive
- Keep out of prolonged UV exposure
Specs
- Coverage: 269 sq ft per roll
- Dimensions: 3'2-3/4" × 83'4"
- Thickness: ~1/8" (3 mm)
- Functions: Uncoupling + Waterproofing + Vapor Management + Load Distribution
- Adhesive: Pressure-sensitive (PSA), solvent-free
- Min tile size: 2" × 2"
Pairs with
- PRIMER-PS — for substrate preparation on difficult surfaces
- Schluter SET, ALL-SET, or FAST-SET mortar — tile bonding
- KERDI-BAND — for seam sealing at transitions
Common questions
What will it stick to?
Concrete, OSB (including AdvanTech) and plywood, and it can go over a range of existing floor coverings.
Do I need thin-set under it?
No. The adhesive backing replaces the thin-set under the membrane. You still set the tile on top in thin-set.
Does it do what regular DITRA does?
Yes. It has the same benefits as DITRA, including the easy-cut grooves and air-release vents.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

